Scanner Hardware Comparison


Please note: Our annual vacation close-down takes place from 22.05.2024 until 08.06.2024.
There will be no support and no shipping during this time.

Following tables give a quick overview about all laser galvanometer scanners and scan system hardware which is available from HALaser Systems:

HALdrive X20
HALscan 10.20
HALscan 10N20
HALscan 16.20
HALscan 20.20
HALscan 30.20
Type XY3-100 to analogue converter 10 mm XY3-100 galvanometer scanner 10 mm NX-02 galvanometer scanner 16 mm XY3-100 galvanometer scanner 20 mm XY3-100 galvanometer scanner 30 mm XY3-100 galvanometer scanner
Interface to Controller Card XY3-100 via 26-pin IDC
or 25-pin D-SUB25 connector
XY3-100 via 25-pin D-SUB25 connector NX-02 via 25-pin D-SUB25 connector XY3-100 via 25-pin D-SUB25 connector XY3-100 via 25-pin D-SUB25 connector XY3-100 via 25-pin D-SUB25 connector
Description Converter board to connect a XY3-100 scanner controller with a galvanometer scanner using ±5 V or ±10 V control signals Fully equipped laser scanning head with housing and 10 mm aperture, can be used with additional lenses Fully equipped laser scanning head with housing and 16 mm aperture, can be used with additional lenses Fully equipped laser scanning head with housing and 20 mm aperture, can be used with additional lenses Fully equipped laser scanning head with housing and 30 mm aperture, can be used with additional lenses
Production State
Active, can be used for new designs

Active, can be used for new designs

Active, can be used for new designs

Active, can be used for new designs

Active, can be used for new designs
Power Supply ±15 V and 0,5 A ±15 V and 3 A ±15 V and 3 A ±15 V and 3 A ±15 V and 3 A
Resolution / Accuracy 20 bits / 1048576 steps (digital) 20 bits / 1048576 steps (digital)
1 μrad (mechanical)
20 bits / 1048576 steps (digital)
1,1 μrad (mechanical)
20 bits / 1048576 steps (digital)
1,15 μrad (mechanical)
20 bits / 1048576 steps (digital)
1,15 μrad (mechanical)
Maximum Laser Power depends on connected scanhead 90 W 600 W
(at specific wavelengths, please refer to manual)
2 kW
(at specific wavelengths, please refer to manual)
4 kW
(at specific wavelengths, please refer to manual)
Water Cooling does not apply not available optional optional optional
Maximum Speed Nominal: 100000x full working area size per second
Actual: depends on connected scanhead
>7 m/sec >7 m/sec >5 m/sec >4 m/sec
Detailled Information Click here! Click here! Click here! Click here! Click here!